 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC74VHCT125,126AF/AFN/AFT/AFK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VHCT125AF,TC74VHCT125AFN,TC74VHCT125AFT,TC74VHCT125AFK TC74VHCT126AF,TC74VHCT126AFN,TC74VHCT126AFT,TC74VHCT126AFK TC74VHCT125AF/AFN/AFT/AFK TC74VHCT126AF/AFN/AFT/AFK Quad Bus Buffer Quad Bus Buffer Note: xxxFN (JEDEC SOP) is not available in Japan. TC74VHCT125AF, TC74VHCT126AF The TC74VHCT125A/126A are high speed CMOS QUAD BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Shottky TTL while maintaining the CMOS low power dissipation. The TC74VHCT125A requires the 3-state control input G to be set high to place the output into the high impedance state, whereas the TC74VHCT126A requires the control input G to be set low to place the output into high impedance. The input voltage are compatible with TTL output voltage. This device may be used as a level converter for interfacing 3.3 V to 5 V system. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. There structure prevents device detsruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc. Note: VCC = 0 V TC74VHCT125AFN, TC74VHCT126AFN TC74VHCT125AFT, TC74VHCT126AFT Features * * * * * * * High speed: tpd = 3.8 ns (typ.) at VCC = 5 V Low power dissipation: ICC = 4 A (max) at Ta = 25C Compatible with TTL outputs: VIL = 0.8 V (max) VIH = 2.0 V (min) Power down protection is provided on all inputs and outputs. Balanced propagation delays: tpLH tpHL - Low noise: VOLP = 0.8 V (max) Pin and function compatible with the 74 series (74AC/HC/F/ALS/LS etc.) 125/126 types. TC74VHCT125AFK, TC74VHCT126AFK Weight SOP14-P-300-1.27A SOL14-P-150-1.27 TSSOP14-P-0044-0.65A VSSOP14-P-0030-0.50 : 0.18 g (typ.) : 0.12 g (typ.) : 0.06 g (typ.) : 0.02 g (typ.) 1 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Pin Assignment TC74VHCT125A 1G 1A 1Y 2G TC74VHCT126A 14 13 12 11 10 9 8 VCC 1 2 3 4 5 6 7 (top view) 1G 1A 1Y 2G 2A 2Y GND 1 2 3 4 5 6 7 (top view) 14 13 12 11 10 9 8 VCC 4G 4A 4Y 3G 3A 3Y 4G 4A 4Y 3G 2A 2Y GND 3A 3Y IEC Logic Symbol TC74VHCT125A 1G 1A 2G 2A 3G 3A 4G 4A (1) (2) (4) (5) (10) (9) (13) (12) EN (3) (6) (8) (11) 1Y 2Y 3Y 4Y 1G 1A 2G 2A 3G 3A 4G 4A (1) (2) (4) (5) (10) (9) (13) (12) TC74VHCT126A EN (3) (6) (8) (11) 1Y 2Y 3Y 4Y Truth Table TC74VHCT125A Inputs Output A X L H Y Z L H G L H H TC74VHCT126A Inputs A X L H Output Y Z L H G H L L X: Don't care Z: High impedance X: Don't care Z: High impedance 2 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Absolute Maximum Ratings (Note 1) Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating -0.5 to 7.0 -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -20 20 25 50 Unit V V (Note 2) (Note 3) V mA (Note 4) mA mA mA mW C 180 -65 to 150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Output in off-state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 4.5 to 5.5 0 to 5.5 0 to 5.5 0 to VCC -40 to 85 Unit V V (Note 2) (Note 3) V C ns/V 0 to 20 Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Output in off-state Note 3: High or low state 3 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Electrical Characteristics DC Characteristics Ta = 25C Characteristics Symbol Test Condition VCC (V) 4.5 to 5.5 4.5 to 5.5 4.5 4.5 4.5 4.5 0 to 5.5 5.5 5.5 5.5 0 Min 2.0 Typ. Ta = -40 to 85C Max Unit Min 2.0 Max High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage Input leakage current 3-state output off-state current VIH V VIL 0.8 0.8 V VOH VIN = VIH or VIL IOH = -50 A IOH = -8 mA IOL = 50 A IOL = 8 mA 4.40 3.94 4.50 4.40 3.80 V VOL VIN = VIH or VIL 0.0 0.1 0.36 0.1 0.1 0.44 1.0 V IIN VIN = 5.5 V or GND VIN = VIH or VIL VOUT = VCC or GND VIN = VCC or GND Per input: VIN = 3.4 V Other input: VCC or GND VOUT = 5.5 V A IOZ ICC 0.25 2.50 A A 4.0 1.35 0.5 40.0 1.50 5.0 Quiescent supply current Output leakage current ICCT IOPD mA A AC Characteristics (input: tr = tf = 3 ns) Characteristics Symbol tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL CIN COUT CPD TC74VHCT125A Test Condition VCC (V) Propagation delay time Output enable time Ta = 25C CL (pF) 15 50 Min Ta = -40 to 85C Max 5.5 7.5 5.1 7.1 8.8 Min 1.0 1.0 1.0 1.0 1.0 Max 6.5 8.5 6.0 8.0 10.0 Unit Typ. 3.8 5.3 3.6 5.1 6.1 5.0 0.5 ns RL = 1 k 5.0 0.5 15 50 50 ns Output disable time RL = 1 k 5.0 0.5 ns Output to output skew Input capacitance Output capacitance Power dissipation capacitance (Note 1) 5.0 0.5 50 1.0 10 1.0 10 ns pF pF pF 4 6 14 15 (Note 2) TC74VHCT126A Note 1: Parameter guaranteed by design. tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn| Note 2: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPD*VCC*fIN + ICC/4 (per gate) 4 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Noise Characteristics (input: tr = tf = 3 ns) Characteristics Quiet output maximum dynamic VOL Quiet output minimum dynamic VOL Minimum high level dynamic input voltage Maximum low level dynamic input voltage Symbol VOLP VOLV VIHD VILD CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF Test Condition Ta = 25C VCC (V) 5.0 5.0 5.0 5.0 Typ. 0.5 -0.5 Limit 0.8 -0.8 Unit V V V V 2.0 0.8 5 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Package Dimensions Weight: 0.18 g (typ.) 6 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Package Dimensions (Note) Note: This package is not available in Japan. Weight: 0.12 g (typ.) 7 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Package Dimensions Weight: 0.06 g (typ.) 8 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK Package Dimensions Weight: 0.02 g (typ.) 9 2007-10-02 TC74VHCT125,126AF/AFN/AFT/AFK RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 10 2007-10-02 |
Price & Availability of TC74VHCT125AF07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |